[1247] A Serious Flaw In The Anytek Fingerprint Padlock (Model L3)

24 lut 2021
435 551 wyświetleń

www.covertinstruments.com

Komentarze
  • This lock is top of the line and indestructible... until you move, shake or tap it gently :)

    Al MarshallAl Marshall21 godzinę temu
  • If Apple made a lock, this would be the product.

    Carlos ReboloCarlos ReboloDzień temu
  • I feel all my existence has been a fluke untill I discovered this channel

    punjabiexplorerpunjabiexplorer3 dni temu
  • Another lock built by an electrical engineer.

    zcribezcribe3 dni temu
  • i just bought this then youtube recommends me this channel....wat the...

    cahn7435cahn74354 dni temu
  • "Ok folks"... this is a piece of shit

    Geoff WolyniecGeoff Wolyniec4 dni temu
  • i think is a crime to build suck shit padlock :( they are expensive as hell too

    Green_EyE_Cat_StudioGreen_EyE_Cat_Studio5 dni temu
  • *Padlock exists* LockPickingLawyer: imma end this man's whole career

    Eloy BernaEloy Berna6 dni temu
  • Wow... 😲😲😲

    Anthony NAnthony N7 dni temu
  • Mr. Lock Picking Lawyer, apparently they all suck. Which lock can I buy that doesn’t suck so bad?

    SkyBoomerSkyBoomer12 dni temu
  • High-tech lock Defeated with only a hammer Wrapping

    GradientGamerGradientGamer15 dni temu
  • "Umm. It's a.... BACKDOOR ACCESS FEATURE! Yes, that's it!" - designer, probably.

    Someone's Youtube UsernameSomeone's Youtube Username20 dni temu
  • How much does this hi-tech lock cost again?

    zobitXzobitX21 dzień temu
  • You should have a mock up door or gate to show how difficult it would be to do when actually attached to something. I would think your hands get in the way and make this more difficult.

    Dustin HullDustin Hull21 dzień temu
  • I did have a nice day, thanks

    TheMonkeyGrapeTheMonkeyGrape22 dni temu
  • I wonder, why won't the companies producing locks hire a professional to find out the flaws of their products before mass producing them and putting them on the market and ruining their own brand. Just imagine if these Anytek or whatever company produced 20 of those locks and sent them to 20 locksmiths before actually starting to produce them in bulk. There wouldn't be low quality metal used, and they could actually find a way to stop the lock from opening with just a flick on the side!

    pa bupa bu24 dni temu
  • old school picking.

    HeimdallHeimdall25 dni temu
  • Damn, I must have leveled up, because the moment he said "spring-loaded locking lug", I immediately thought "rap attack?" And I've never picked a lock in my life...

    eksentrysytieksentrysyti25 dni temu
  • Hey U need i check the Dindughal Lock which is actually a big lock made in Tamil Nadu India

    Aswin S NairAswin S Nair26 dni temu
  • 4 je Alcorythm ❤️

    Mulluk KullumMulluk Kullum26 dni temu
  • im pretty sure the lock picking lawyer is not a real lawyer 😬

    Gerardin PinguinGerardin Pinguin26 dni temu
    • I heard he isn't a lock picker either😤

      epic manepic man18 dni temu
  • I think this would be fine for a dressing room locker, obviously not a high security application.

    Fred LastFred Last26 dni temu
  • At this point I don't even want to lock my home because thanks to him I know no lock is good enough

    Gaurav PareekGaurav Pareek27 dni temu
  • if you design an electronic lock - you really should use at least 2 testing tools. A mallet and a magnet. No skills required.

    A DogA Dog27 dni temu
  • this is a beautiful dummy lock, nice one

    Louis YeungLouis Yeung27 dni temu
  • lets make a lock that use DNA, lazer, 120 digit code, voice sensor,infrared sensor , AI , TV screen, netflix subscription, water bending, hokage level, nuclear bomb, humain eraser and finger print lock ... of dont worry make is of plastic and a single spring

    Slimser SenseiSlimser Sensei27 dni temu
  • Take 2 sec to open... xD

    Drive EVolutionDrive EVolution28 dni temu
  • your probably doing this to make awareness but imagine how many people watch your videos to break into locks

    FrightFright28 dni temu
  • Thank you. Save my money from buying it.

    Para BinaPara Bina29 dni temu
  • I want to design garbage like this and make millions too!

    Jeffrey VelasquezJeffrey VelasquezMiesiąc temu
  • 1. Me Buying Anytek lock... 2. me googling how I add a Fingerprint 3. me finding this Video....

    John JoehrJohn JoehrMiesiąc temu
  • I like how he picks them in seconds. But this is like a school for thieves.

    Dusan IvanovicDusan IvanovicMiesiąc temu
  • Mc Hammer would be proud. It's hammer time.

    RMJ1984RMJ1984Miesiąc temu
  • I don't see anything wrong here. If the fingerprint stopped working, you could use the hammer. Why don't people understand it's part of the design smh...

    Melis DerveniMelis DerveniMiesiąc temu
  • It went from "padlock" to "trashlock" really fast

    SanjitSanjitMiesiąc temu
  • A whack-a-mole toy designed to look like a padlock. How quaint.

    AnAZPatriotAnAZPatriotMiesiąc temu
  • It's never a fluke...

    ZorgdubZorgdubMiesiąc temu
  • Plot twist : All the people disliking are the people working for the key lock industry

    Michinobu ImaiMichinobu ImaiMiesiąc temu
  • FROZEN PEE HAMMER

    RainbowGuy182RainbowGuy182Miesiąc temu
  • Its not a vulnerability. Its a feature called "Double tap to unlock"

    Shubhang BorkarShubhang BorkarMiesiąc temu
  • SEND the video to the MANUFACTURER and STOP showing criminals how to break in!!!

    Chad MuskaaChad MuskaaMiesiąc temu
  • Are there any good and actually secure locks?

    Matt DeKokMatt DeKokMiesiąc temu
  • I have never fully understood the use of biometrical security devices (except for very specific cases). While the LPL, for instance, tends not to show his real keys or his real locks or his precise location, it would be easy for anyone to remodel and fake his fingerprints by the high-definition PLworld videos of his alone, or by offering him a glass of soda and then applying some simple adhesive tape to the glass afterwards. Perhaps one might even get the fingerprint off the very fingerprint sensor. Even though, admittedly, some more advanced methods of fingerprint analysis have been developed -- you are bound by your at max ten fingerprints. You will not be able to change them. So once they have been leaked, you have been, erm, insecured. This disqualifies biometrical security for purposes of legitimisation or authorisation (albeit not for identification, but there are serious downsides even in that realm). So: Why?! Must be just toying around.

    t0ndat0ndaMiesiąc temu
  • Isn't the fact that you can turn aluminum into powder with a single drop of gallium reason enough not to use it for any security devices?

    johnfaber100johnfaber100Miesiąc temu
  • Easyest way to open many things and trues

    David Michael HasselhoffDavid Michael HasselhoffMiesiąc temu
  • It looks good, but as the saying goes, Don't judge a lock by it's aesthetically pleasing well curved body.

    stewstewMiesiąc temu
  • Everyone gangsta untill LPL brings out his hammer

    Naqi RazaNaqi RazaMiesiąc temu
  • what happens when its battery dies

    DaveOzDaveOzMiesiąc temu
  • I wonder how many thieves are subscribed to this channel

    E HE HMiesiąc temu
  • You nailed the lock picking with a hammer 😂

    N BauaN BauaMiesiąc temu
  • You should try the EMP generator on this

    DoctorX17DoctorX17Miesiąc temu
  • You are quite the intellectual, a great puzzle solver.

    Ziggy SchumannZiggy SchumannMiesiąc temu
  • Where did you go to school ?

    JOSE GUTIERREZJOSE GUTIERREZMiesiąc temu
  • Anytek lock Anytime open

    Dr. Shadox φDr. Shadox φMiesiąc temu
  • you should design you own lock to be better than the other locks and then have a cnc or manual machinist make it for you

    The Mini MachinistThe Mini MachinistMiesiąc temu
  • Haaa... No ablo inglés 😐

    Reina RodriguezReina RodriguezMiesiąc temu
  • Is there any fucking lock, that you really recommend and can last at least 20 minutes to pick or crack open it?

    Eugene S.Eugene S.Miesiąc temu
  • BRING OUT THE HONEY HAMMER

    The GeckoThe GeckoMiesiąc temu
  • may be good enough for your gym locker

    Denis RhodesDenis RhodesMiesiąc temu
  • Feels odd when you predict how to open it just by looking at the thumbnail.

    Joseph WillisJoseph WillisMiesiąc temu
  • And anytek stocks plummet through the floor 😅🤣

    Dusty Road DesignDusty Road DesignMiesiąc temu
  • "Obviously, that was a pretty disappointing performance." --my girlfriend, if I had one

    Josiah P.Josiah P.Miesiąc temu
  • Garbage 😆😆😆😆😆

    albert leealbert leeMiesiąc temu
  • Other people: hmm this lock is made out of lock Lockpickinglawyer: hehe door go brr

    Grey_ WhatshisnameGrey_ WhatshisnameMiesiąc temu
  • He isn't even picking them anymore. "Just lightly slap it aaaaand its open."

    Nate HansenNate HansenMiesiąc temu
  • Every few months this channel pops up on my feed, and then I keep watching it for days.

    the0master200the0master200Miesiąc temu
  • any lock that needs to be recharged is pure garbage

    Osw719Osw719Miesiąc temu
  • LPL you are proof of the Old Adage that locks only keep out honest people. All your videos are great & I enjoy all the different ideas you have to defeat locks with some of my favorite tools. 😎

    Cuda MikeCuda MikeMiesiąc temu
  • Why haven’t there been lawsuits against these lock makers.

    Ddamien17 17Ddamien17 17Miesiąc temu
  • There are more non magnetic metals if u count all steel variants as 1 point which surprised me when i found that out yes this comment is unrelated i just thought of it since he said the lock isnt magnetic

    Cyber warCyber warMiesiąc temu
  • Fancy tech is no match for fundamental mechanics.

    Marked AshamedMarked AshamedMiesiąc temu
  • If you think about it any lock can be broken regardless of what it's made of

    ZAICROMEZAICROMEMiesiąc temu
  • How exactly do you find a flaw like this? Do you just say "I think I'll hit it with a mallet" or what?

    deepwater-jewdeepwater-jewMiesiąc temu
  • Why don't you create a lock

    Pranay patelPranay patelMiesiąc temu
  • Bang bang, pop. Ok, fuck I am hitting dislike.. I really dislike this lock.

    Stuart WilsonStuart WilsonMiesiąc temu
  • You are teaching people to break into peoples houses.

    GodGodMiesiąc temu
  • Basically Ork Tech to open that padlock

    Marshall EphistoMarshall EphistoMiesiąc temu
  • Your my Go To magician, lol I can always look forward to your next trick.

    NeedshoeNeedshoeMiesiąc temu
  • But hey, it's pick resistant!

    MushiousMushiousMiesiąc temu
  • You should do a collaboration with This Old Tony. I would love to see the 4 hands working together. Maybe design a lock.

    Pete BallPete BallMiesiąc temu
  • Seems good for a school locker nice and lightweight won't scratch up the locker no combo to forget. Does it have a master function? How much is it?

    Don't CryDon't CryMiesiąc temu
  • I am pretty sure, our lockpicking lawyer can lockpick anything and everything

    KAORU VIRUS [a.k.a. Selvariabell]KAORU VIRUS [a.k.a. Selvariabell]Miesiąc temu
  • If there is ever to be an apocalypse, it will end with the words “This is the LockpickingLawyor and what I have for you today is a steel and concrete bunker with a serious flaw...”

    Clayton CronkClayton CronkMiesiąc temu
  • But is it waterproof though

    Crimson DigitalCrimson DigitalMiesiąc temu
  • Its like a coolish school locker lock if you don't have anything interesting to steal stashed inside

    Mark & IleneMark & IleneMiesiąc temu
  • How long does it take you to figure out how to pick these locked? Or break them open

    Chizzles playzChizzles playzMiesiąc temu
  • Maybe it's just me, but "Anytek" sounds awfully similar to "Initech", the company from Office Space.

    LJCyrus1LJCyrus1Miesiąc temu
  • I only come here for the flukes 🤣

    s ss sMiesiąc temu
  • 1:54, is that the shortest video from LPL?

    Thierry ThelliezThierry ThelliezMiesiąc temu
  • LPL putting lock makers to shame! 😂

    Scotty SmithScotty SmithMiesiąc temu
  • Why doesn't the lockpicking lawyer own a lock design company.

    AxodusAxodusMiesiąc temu
  • When PLworld takes longer to load the video than LPL takes to open the lock.

    ABaumstumpfABaumstumpfMiesiąc temu
  • Try tokoz Gama pro :)

    vlkvlkMiesiąc temu
  • There's no such thing as a good lock 🤣😂😭

    DecimyS96DecimyS96Miesiąc temu
  • High quality :)))))))))

    6re6ory6re6oryMiesiąc temu
  • Me and my 5 year old son watch every one of your videos

    Boda ScambaitsBoda ScambaitsMiesiąc temu
  • when the preroll add go's longer than the unlocking of the padlock.

    VK3HAUVK3HAUMiesiąc temu
  • This series should be called. "100 ways to open a lock..."

    demon yedemon yeMiesiąc temu
  • is there any good lock left? 100+ episodes of all bad locks out there...

    gzgzMiesiąc temu
  • and another "smart" padlock fail. Honestly I want Mul-T-Lock to make a smart lock with an RFID card just so they can call it a Mul-T-Pass

    David KearnsDavid KearnsMiesiąc temu
PLworld